1999 Radio Bezel - CA
 

Kinda funny but then again not.
I recently bought a 1999 Ranger 4X4 and for the first time tried to push in the lighter to see if it worked. It wouldnt move so I tried to pull the lighter out. Nope. I then yanked on it and BOY did it come out!
The lighter appears to have been glued in so when I yanked the bezel broke and the entire unit came through the now large hole.

I am now seeking a replacement that has:
4wd + Foglights + Cig lighter + 12v.
Two foglight switches is also fine provided it come with the additional switch

I'm in Burbank Calif

PS I have checked local junk yards none have this setup. The close ones are trashed. Broken tabs etc
No love checking e-Bay so far

Dd you ever get another radio bezel ?

I have a couple, leet me know... ?

Ty Buddy. I fixed it due to absolute necessity.
I took two of those 2 dollar add-on 12V plugs from a local auto parts place then very carefully cut the outside ring off with a Dremel. That left just enough to slide what was left back in from the back of the bexel. I Then used Gorrilla Glue and let it sit for about 20 hours. For giggles I did the same to the 12V plug. Hense 2.
So far it is rock solid and I change devices constantly. I also broke down and hardwired a 12V multi port with USB. Not a single issue since But TY for asking

Im needing a radio bezel..let me know if you have one and can you send me a pic.. I have a 1999 Ford Ranger, Standard.. Thank you..

Chk the FS Classified Ads.
I have three or four units for sale and you need to pick the configuration.
Thks

Here's one... https://www.ranger-forums.com/interi...ins-ma-137182/

I want to thank Scrambler82 for selling to me a radio face bezel i needed for the longest time for my 1999 ford ranger. It fits perfectly.. Thank you.. Robert T..